Product Highlights
Converts a USB port to an RS485 port.
Remote control & monitoring for all connected modules.
Access permission settings.
Supports MODBUS RTU using the RS485 port.
Full building management system integration.
Firmware upgradeable.
DIN rail mount.
Specification
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
123 mA at 12 V
71 mA at 24 V
MAXIMUM STANDBY CURRENT
104 mA at 12 V
63 mA at 24 V
COMMUNICATIONS
USB (Single DSE Controller)
RS485
