ESD5111

Multi-VDC / Standard Unit / Isochronous, Variable & Droop Operation / Variable Speed Trim Range

The ESD5100 Series speed control unit is an all- electronic device designed to control engine speed with fast and precise response to transient load changes. This closed loop control, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous or droop mode. It is designed for high reliability and it’s hard potted to withstand the engine environment.

หมวดหมู่:
เปรียบเทียบสินค้า

Features

Multi-VDC

Isochronous, Variable & Droop Operation

Adjustable PID

Idle Speed Adjustment

Auxiliary Accessory Input

Temperature Compensated Available

Soft Coupling Options Available

EFC Reverse Acting Options Available

EFC Forward Acting

Light Force Option Available


SPECIFICATIONS

PERFORMANCE

Isochronous Operation
±0.25 % or better

Speed Range /Governor
1K – 7.5K Hz Continuous

Speed Drift with Temperature
±0.5% Typical

Idle Adjust CW
Min. 1200 Hz Below set speed

Idle Adjust CCW
Min. 4100 Hz Below set speed

Droop Range
1 – 5% Regulation*

Droop Adj. Max. (K-L Jumpered)
875 Hz., ±75 Hz per 1.0 A change

Droop Adj. Min. (K-L Jumpered)
15 Hz., ±6 Hz per 1.0 A change

Speed Trim Range
±200 Hz

Remote Variable Speed Range
500 – 3.7 kHz

Terminal Sensitivity
J 115 Hz., ±15 Hz/Volt @ 5 K Impedance
L 735 Hz., ±60 Hz/Volt @ 65 K Impedance
N 148 Hz., ±10 Hz/Volt @ 1 M Impedance
P 10 VDC Supply @ 20 mA Max.

PHYSICAL

Weight
1.2 lb.(0.545 kg)

Mounting
Any Position, vertical preferred

RELIABILITY

Vibration
1G, 20-100 Hz

Testing
100% Functionally Tested

ENVIRONMENTAL

Ambient Temperature
-40° to +185°F (-40° to +85°C)

Relative Humidity
up to 95%

All Surface Finishes
Fungus proof and corrosion resistant

RoHS Regulation
Compliant

INPUT POWER

DC Supply
12 or 24 VDC Battery Systems
(Transient and Reverse Voltage Protected)

Polarity
Negative Ground (case isolated)

Power Consumption
100 mA (No actuator current)

Speed Signal Range
0.5 – 50 VAC

Actuator Current Range
10 Amps continuous @ 77°F (25°C)

Speed Signal Range
1.0 to 50.0 VAC

COMPLIANCE / STANDARDS

Agency
CE Requirements

X